A glass shower enclosure is the preferred choice of most people who want to remodel their bathrooms. These enclosures are not only trendy but also give your bathroom a modern look. However, excessive wear and tear or low maintenance may affect their quality. In order to prolong the life of your glass enclosures, you must mend them whenever needed.
Mentioned below are some signs that your glass shower enclosure requires immediate repair.
Sliding doors move out of the track – The shower enclosures with sliding doors not only look trendy but also saves a lot of space in the bathroom. With usage, these doors lose their lubrication and hence show difficulty while sliding. When neglected, the doors tend to move off the track and do not close, which may leave the bathroom wet and moist. To fix this problem you must consider contacting the professionals.
Some doors refuse to shut – Excessive use may loosen the hinges and screws, which often fallout from the door. These fitting problems slacken the door and disrupt its functioning. Users often think that shutting the door with force may solve their problem but, that never happens. The condition may get worsened if the glass breaks, thus it is important to take the help of technicians and get it repaired as soon as possible.
Cracks and Scratches – A sudden blow from a hard object or exposure to excessive temperature can lead to a crack in your glass shower enclosure. A minor scratch caused by the contact of a sharp object may also grow into a deep fissure at a later stage, ruining the prettiness of your shower enclosures. Therefore, it is recommended that you must get the cracks and scratches treated immediately.
Leaking doors – Sometimes improper installation of the glasses in the shower enclosures may lead to minor leakage issues in the doors. Spaces may get created between the fittings, which may not allow the glass to seal properly, causing the water to flow out of the door. This matter must be addressed to the professionals on priority so that they can repair the protective sealant of your glass.
Rusted hardware – With frequent contact with water, the metal elements used to fix and fit the shower enclosure may get rusted. These corroded fixtures lead to malfunctioning of the door and do not let them open or shut properly. The faulty shower enclosure provides no benefit and leaves the bathroom wet and damp. Make sure that all the door joints are in proper condition. In case you witness rusted elements, get them replaced by the experts. It would be a wise idea to use the fixtures made up of stainless steel which do not corrode soon.
Discoloration- The bathroom offers most favorable conditions for the molds to grow over the glass door surfaces which may cause discoloration of the doors. Other major reasons include accumulation of dust, water and soap buildup. As a result, the doors tend to lose their shine and luster with time. Discoloration may also occur due to improper installation, which doesn’t allow the glass to seal properly. While there are cleaning agents that can fix this problem, in order to get back the shiny appearance of your shower enclosures you must take the help from experts. They use the right tools and techniques to clean up the glass surfaces and extract the accumulated dirt and soap buildups.
We, at Triple Crown Glass & Mirror, offer glass shower enclosure repair services in Belton, TX. The technicians also have extensive experience in installing all types of shower enclosures. For more information, you can call at (254) 931 – 7961 or visit 2020 S IH 35, Belton, TX 76513.
Having a glass shower door can completely transform the look of your bathroom. However, it can easily accumulate dirt and grime. It is essential to clean the glass shower door regularly to avoid dust-buildup and make it look new.
Glass shower doors are available in a wide range of options. Frameless enclosures are easier to clean as compared to framed ones. You must choose a suitable glass shower doors according to your requirements.
Here are a few tips which can help to keep your glass shower enclosures clean.
Keep The Glass Dry
It is important to squeegee down the glass door after every shower. It will keep the glass dry and prevent settling of the water droplets. The water comprises of certain minerals which get deposited on the glass, making it hard to clean them. Thus, wiping off the glass shower door with the help of a sponge will keep it spotless and clean.
Make Use Of Commercial Cleaners
There are a number of cleaning products available these days. Make sure you choose the one that does not have harmful chemicals. You should spray the cleaner on the glass and wipe it off. This will remove stubborn stains, smudges and dirt from the door. However, you must go through the instructions mentioned on the label to ensure thorough cleaning.
Home Remedies Can Be Helpful
Certain home remedies can be followed to keep your shower doors clean. You can mix one part vinegar with four parts water to form a solution. Spray this mixture on the glass shower enclosures to remove all stains, dirt and grime. Bleach can also be an effective method to clean the glass door and prevent the growth of mold or mildew. Make sure you apply these mixtures once in a week for best results.
You can use a paste of baking soda as well as water to remove stains and clean your glass shower door. It will help to deodorize your bathroom. A mixture of lemon juice and salt can also be beneficial to clean the rust. You can scrape off the corners of the metal frame with the help of a toothbrush. Let the mixture settle before rinsing it with warm water.
Proper Ventilation Is Important
To ensure adequate ventilation in the bathroom, you can open the door and turn on the fan. It will fasten the drying process and avoid water stains. This will also help to maintain your health while keeping infections at bay.
Fabric Softener Sheet Should Be Used
Fabric softener sheets help to break up the stains on the glass shower doors. You just need to use one sheet to wipe off the water droplets and stains, leaving the door completely clean and dry. This is an easy way to maintain your shower enclosure in an efficient manner.
Don’t Use Cotton Rags Or Paper Towels
Use microfiber cloth instead of cotton rags and the paper towels. When you clean the glass, the synthetic fibers in the cloth rub together. This creates a static charge between them which helps to attract dust and dirt. Also microfibers do not cause any scratch or mark on the glass as compared to cotton rags and towels.
Apply A Protector
To prolong the life of the glass, you can apply a protector. It is a cost effective alternative and acts as a long term solution to maintain your glass shower enclosure. A protector can help to remove the hard stains and restore the shine of the glass.
Glass shower enclosures can be a good option to improve the visual appearance of your home. They can also help to provide a spacious look to your bathroom. However, cleaning glass shower enclosures are important. With the above mentioned tips, you will be able to keep your glass shower doors stain-free. You can even hire professional services to keep your glass shower doors spick and span.
Triple Crown Glass & Mirror is a leading company offering a wide range of glass shower enclosures in Belton, TX. The technicians will help you to maintain the shower door in a better way. For more information, you can call at (254) 931 – 7961 or visit 2020 S IH 35, Belton, TX 76513.
Glass shower enclosures can add significant style and modernistic look to any bathroom. However, one needs to choose a glass shower enclosure that goes well with the décor of the bathroom and perfectly serves the purpose. It should not only look elegant but also be leak-proof and made of high quality material.
If you are planning to buy a glass shower enclosure in Belton, TX, make sure you choose a company that has expert technicians and offers the best after-sales service as well. Below is a list of factors that you need to consider when choosing a glass shower enclosure for your bathroom:
- Functionality: Narrow down your choices based on the location of shower or bathtub, the material used in the walls and if they can bear the weight of the glass. You should also measure the space available in the bathroom so that the shower enclosure can be flawlessly installed.
- Choose the right style: You have the option to choose between a framed, semi-frameless and a frameless glass shower enclosure. A framed enclosure is quite cost-effective and robust. On the other hand, a frameless shower enclosure has only hinges and metal clips to provide support to the panels. Though slightly expensive than the frameless enclosures, these are opted by most homeowners in Belton. You can also go for a semi-frameless shower enclosure that has almost no frame on the door. These enclosures are quite sleek in appearance, water tight and can be easily cleaned. The minimal frame in the door helps to provide the required support to the glass.
- Decide the type of glass: You can choose from a wide array of glasses such as frosted, textured, opaque etc. to give a unique look to the shower enclosure. Make sure you go for a treated glass as it comes with a permanent protective layer that increases its durability by preventing discoloration due to hard water.
- Select door hinges: The door hinges for your shower enclosure should be selected based on the available space, affordability and appearance that you want. You can take your pick from sliding, hinge and pivot doors. While hinge doors are a popular choice, pivot-type doors provide a contemporary and sleek look to your bathroom without the use of traditional hinges.
Paying attention to all these aspects will help you in choosing an extremely functional glass shower enclosure. Contact Triple Crown Glass & Mirror for high quality glass shower enclosures in Belton, TX. Call at (254) 931 – 7961 or visit 2020 S IH 35, Belton, Texas 76513 for details about the services offered.